AR20.40-T-0005AAA | Remove/install hydraulic fluid expansion reservoir | 8.11.01 |
ENGINE 457.942 in MODEL NMB671.015 /332
T20.30-0026-01
T20.40-0023-01
T20.40-0022-01
1 Coolant expansion reservoir
2 Hydraulic fluid expansion reservoir
Shown with the maintenance flap of the radiator removed
4 Drain hose
2 Hydraulic fluid expansion reservoir
3 Drain plug
5 Screw
| Remove/Install | ||
1 | Remove the coolant expansion reservoir (1) | ||
Danger! | Risk of injury to skin or eyes caused by hydraulic fluid spraying out under pressure. Risk of poisoning caused by swallowing hydraulic fluid. | Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses. | |
2 | Drain hydraulic fluid | ||
| Hydrostatic fan drive - oil and filter change | ||
3 | Detach the drain hose (4) | The drain hose (4) can be reached through the opened radiator maintenance flap in the passenger compartment. | |
4 | Unscrew screws (arrows) | The bolts (arrows) can be reached through the opened radiator maintenance flap in the passenger compartment. | |
5 | Disconnect the electrical connector from the oil level sensor | ||
6 | Detach the feed line and the vent line from the hydraulic fluid expansion reservoir (2) | The feed line is located in the rear area of the hydraulic fluid expansion reservoir (2). | |
Installation: Clean sealing surfaces, install new gasket. | |||
7 | Unscrew bolts (5). | ||
8 | Remove the hydraulic fluid expansion reservoir (2) | ||
9 | Install in the reverse order |
Odkazované dokumenty
- ap2040t2001aa
- ar2030t4950aaa
- as0000z001301a Nebezpečí poranění kůže a očí hydraulickou kapalinou vystřikující vlivem vysokého tlaku. Nebezpečí otravy při požití hydraulické kapaliny