ar2040t0004aa

Remove/install hydraulic oil cooler

Typ ar · téma 20.40 · verze 0102 · 2005-07-12

Platí pro: ENGINE 457.942 in MODEL NMB671.020 /021 /030 /333 /042

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 20 Chlazení motoru › 20.40 Větrák chladiče, spojka větráku chladiče — Řada 671 (modely 020, 021, 030, 042, 333)

EinPAS 15 Motor › 15.25 Chladicí systém motoru › 15.25.31 Chladič motoru — Řada 671 (modely 020, 021, 030, 042, 333)

Platí také pro motory/převodovky: 457 942

AR20.40-T-0004AA

Remove/install hydraulic oil cooler

20.6.01

ENGINE 457.942 in MODEL NMB671.020 /021 /030 /333 /042

Remove/install hydraulic oil cooler

T20.20-0053-01

1 Feed pipe

2 Return flow pipe

3 Hydraulic oil cooler

4 Grill frame

5 Foam insulation

Remove/Install

1

Open the bottom right rear maintenance flap of the vehicle

2

Raise vehicle.

AR00.60-T-1000AA

3

Remove the engine compartment paneling below the radiator unit

AR61.20-T-1105AA

Danger!

Risk of injury to skin or eyes caused by hydraulic fluid spraying out under pressure. Risk of poisoning caused by swallowing hydraulic fluid.

Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

4

Drain hydraulic fluid

Hydrostatic fan drive - oil and filter change

AP20.40-T-2001AA

5

Detach the return pipe (2) from the hydraulic oil cooler (3)

Collect hydraulic oil which flows out in a suitable vessel.

Installation: Clean sealing surface. Replace seal.

6

Detach the feed pipe (1) from the hydraulic oil cooler (3)

Collect hydraulic oil which flows out in a suitable vessel.

Installation: Clean sealing surface. Replace seal.

7

Detach the hydraulic oil cooler (3) from the radiator frame (4) and remove it in the downward direction

8

Detach foam insulation (5) from the hydraulic oil cooler (3)

9

Install in the reverse order

Odkazované dokumenty