ar2010p3000olf

Remove/install coolant pump switchover valve

Typ ar · téma 20.10 · verze 0100 · 2014-04-11

Platí pro: ENGINE 651 in MODEL 222

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 20 Chlazení motoru › 20.10 Čerpadlo chladicí kapaliny, termostat chlazení — Řada 222 · Řada 651

EinPAS 15 Motor › 15.25 Chladicí systém motoru › 15.25.13 Potrubí/hadice/ventil — Řada 222 · Řada 651

AR20.10-P-3000OLF

Remove/install coolant pump switchover valve

27.03.2014

ENGINE

651 in MODEL 222

Remove/install coolant pump switchover valve

1

Electrical connection

2

Vacuum hoses

3

Retaining tab

4

Coolant pump switchover valve

P07.02-2179-06

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Remove engine cover

Installation: Ensure correct seating.

2

Remove engine air intake duct upstream of air filter

3

Release and disconnect electrical connection (1) on coolant pump switchover valve (4)

4

Mark vacuum hoses (2)

5

Detach vacuum hoses (2) at coolant pump switchover valve (4)

Installation: Observe marking on vacuum hoses (2).

6

Release and detach coolant pump switchover valve (4) on retaining tab (3)

7

Install in the reverse order

Odkazované dokumenty