AR18.30-S-6840B | Removing and installing the oil/water heat exchanger | 20.7.95 |
ENGINE 601 in MODEL 638
S18.30-2000-06
1 Oil filter
2 Oil filter housing
3 Coolant pipe
4 Coolant pipe
5 Seals
6 Oil/water heat exchanger
7 Torx screw
| Removing, installing | ||
Danger! | Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant. | Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks. Wear protective gloves, protective clothes, and eye protection. | |
1 | Drain coolant | ||
2 | Remove oil filter (1) | Allow oil to flow out of oil filter housing | |
3 | Detach coolant pipes (3) and 4) at the oil/water heat exchanger (6) | | |
4 | Remove torx screws (7) | | |
| |||
5 | Detach oil/water heat exchanger (6) at the oil filter housing (2) | Collect oil which flows out. Replace seals (5) and insert into the connection fitting at the oil/water heat exchanger (6) | |
6 | Install in the reverse order |
Oil cooling system
Number | Designation | Engine 601.942 601.970 | |
BA18.30-N-1001-01B | Oil/water heat exchanger to oil filter housing | Nm | 12 |
000 589 01 10 00
Internal torx set
Commercially available tools
Odkazované dokumenty
- ap1800d0101a Výměna oleje a olejového filtru motoru
- ap2000d2080a Výměna chladicí kapaliny
- as2000z000101a Nebezpečí poranění kůže a očí opařením vystřikující, horkou chladicí kapalinou. Nebezpečí otravy při požití chladicí kapaliny