AR15.40-P-5032AK | Remove/install alternator | 25.6.08 |
ENGINE 266.920 /940 /960 /980 in MODEL 169.0 /3, 245.2
P15.40-2521-08
Vehicles without code (B01) ECO Start Stop function
1 Bolt
2 Bolts
3 Circuit 61 connector (D+)
A9 Refrigerant compressor (with code (580) Automatic air conditioning or with code (581) Comfort automatic air conditioning)
G2 Alternator
4 Electrical line
5 Contact protection
6 Nut
7 Carrier
P15.40-2520-09
Vehicles with code (B01) ECO Start Stop function
1 Screw
2 Bolts
3 Circuit 61 connector (D+)
4 Electrical line
5 Contact protection
6 Nut
A9 Refrigerant compressor (with code (580) Automatic air conditioning or with code (581) Comfort automatic air conditioning)
G2 Alternator
7 Carrier
8 Electrical connector
9 Bearing bracket with guide pulley
(without code (580) Automatic air conditioning, without code (581) Comfort automatic air conditioning)
P15.40-2522-11
Vehicles with code (B01) ECO Start Stop function without code (580) Automatic air conditioning without code (581) Comfort automatic air conditioning
7 Carrier
9 Bearing bracket with guide pulley
10 Bolts
| Remove/install | ||
1 | Disconnect battery ground line | ||
2 | Remove poly-V belt | ||
3 | Detach refrigerant compressor (A9) and fasten it on the vehicle underfloor with the connected refrigerant lines | In vehicles with code (580) Automatic air conditioning or with code (581) Comfort automatic air conditioning | |
4 | Remove bolts (10) and remove bearing bracket with guide pulley (9) from carrier (7) | For vehicles with code (B01) ECO Start Stop function without code (580) Automatic air conditioning without code (581) Comfort automatic air conditioning | |
| |||
5 | Remove bolts (1, 2) on carrier (7) | | |
6 | Lower alternator (G2) until the attached liness are accessible | ||
7 | Disconnect electrical connector (8) | For vehicles with code (B01) ECO Start Stop function | |
8 | Disconnect circuit 61 connector (D+) (3) at the alternator (G2) | ||
9 | Detach the protection against accidental contact (5), unscrew the nut (6) and remove the electrical line (4) | | |
10 | Take out alternator (G2) | ||
11 | Install in the reverse order |
Belt tensioning device
Number | Designation | Engine | ||
BA13.25-P-1009-01Q | Bolt, bearing bracket with guide pulley to carrier of poly-V belt tensioning device | Nm | 20 | |
Alternator
Odkazované dokumenty
- ar1322p1202ak Demontáž, montáž vícedrážkového klínového řemene
- ar5410p0003ak Odpojení, připojení ukostřovacího kabelu akumulátoru
- ar8355p5300ak