ar1530d7100d

Remove/install starter

Typ ar · téma 15.30 · verze 0112 · 2012-02-16

Platí pro: ENGINE 904.904 in MODEL 670 ENGINE 904.908 /914 /923 /936 in MODELS 668, 670

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 15 Elektrické zařízení motoru › 15.30 Startér — Řada 668 · Řada 670 · Řada 904 (modely 904, 908, 914, 923, 936)

EinPAS 15 Motor › 15.35 Startér › 15.35.20 Startér — Řada 668 · Řada 670 · Řada 904 (modely 904, 908, 914, 923, 936)

AR15.30-D-7100D

Remove/install starter

15.2.12

ENGINE 904.904 in MODEL 670

ENGINE 904.908 /914 /923 /936 in MODELS 668, 670

Remove/install starter

D15.30-0051-12

1 Control line

2 Starter cables

3 Nut

4 Washer

5 Nut

M1 Starter

Remove/install

1

Switch off ignition

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnecting the battery

Notes on battery

All models

AH54.10-P-0001-01A

3

Unscrew nuts (3) and take off washers (4)

*BA15.30-N-1001-01B

4

Push starter (M1) up at the rear and take it out of the recess at the timing case

5

Detach starter cables (2) and control cable (1) at the solenoid switch of the starter (M1)

Turn starter (M1) until the cables (1, 2) are accessible.
Installation: Before installing starter (M1), fit on cables (1, 2).

Take starter (M1) down and out

Checking

6

Inspect starter (M1) and ring gear of flywheel for wear

Inspect starter pinion for wear, if necessary

Replace starter (M1).

Inspect ring gear of flywheel for wear, if necessary

Replace ring gear of flywheel

AR03.30-W-8312A

Installation: Lightly grease starter pinion and ring gear of flywheel.

*BR00.45-Z-1001-06A

7

Install in the reverse order

Starter

Number

Designation

Engines
900.9, 902.9, 904.9, 906.9

BA15.30-N-1001-01B

Nut, starter to timing case

Nm

50

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-06A

Long-life grease

A 000 989 63 51 11

Odkazované dokumenty