P15.10-2191-04
3 Bolt
B6/4 Left intake camshaft Hall sensor
B6/5 Right intake camshaft Hall sensor
B6/6 Left exhaust camshaft Hall sensor
B6/7 Right exhaust camshaft Hall sensor
| Remove/install | ||
1 | Remove front engine cover and left and right intake air duct | See | |
Remove air filter housing. | |||
2 | Disconnect plug from each camshaft Hall sensor. | ||
3 | Undo bolt (3) and remove each camshaft Hall sensor from front cover on cylinder head | Installation: Replace sealing ring. | |
| |||
4 | Install in the reverse order | ||
5 | Read out fault memory | STAR DIAGNOSIS diagnosis system | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine | Secure vehicle to prevent it from moving by itself. | |
6 | Run engine and inspect for oil leaks |
Position sensor
Number | Designation | Engine | Engine | ||
BA15.10-P-1002-03E | Bolt connecting camshaft Hall sensor to front cover on the cylinder head | Nm | 8 | 8 | |
Commercially available tools
Odkazované dokumenty
- ad0000p200004a Připojení STAR DIAGNOSIS, načtení chybové paměti
- ad0000p200004a
- ar0910p1150rx Demontáž, montáž pláště vzduchového filtru
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru