AR09.40-P-6022MCD | Remove/install oil feed line for turbocharger | 23.7.09 |
ENGINE 660.9 in MODEL 451.3 /4
P09.40-2304-08
1 Oil feed line
2 Banjo bolt
4 Banjo bolt
3 Turbocharger
| Remove/install | ||
1 | Remove rear muffler | ||
2 | Remove banjo bolt (2) at turbocharger (3) | Installation: Replace sealing rings on banjo bolt (2). | |
| |||
3 | Remove banjo bolt (4) at crankcase | Installation: Replace sealing rings on banjo bolt (4). | |
| |||
4 | Remove oil feed line (1) | ||
5 | Install in the reverse order | ||
6 | Check engine oil level using oil dipstick, correct if necessary | The engine oil level must lie inside the area marked on the oil dipstick otherwise engine damage can occur. | |
| Multigrade engine oils (Sheet 229.5) | Sheet 229.5 | |
| Multigrade service engine oil Low SPAsh | Sheet 229.31 | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
7 | Carry out an engine test run and check oil feed line (1) for leaks |
Turbocharger
Odkazované dokumenty
- ar4910p4823mcd
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru
- bb0040p022905a Multigrade motorové oleje (specifikace 229.5)
- bb0040p022931a Multigrade servisní motorové oleje Low SPAsh (specifikace 229.31)