Remove/install air cleaner housing

AR09.10-T-1150C

Remove/install air cleaner housing

25.5.00

 

Remove/install



Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

1

Open engine compartment flap at rear left

2

Detach air cleaner housing (1) from intake hose



Model 613.364:

The air cleaner housing is mounted turned through 90°.

Model 613.364/365:

The clamp for securing the intake hose is located behind the air cleaner housing.

3

Detach air line for maintenance indicator from air cleaner housing (1)

 Not on model 613.358/388.

4

Detach air cleaner housing with tensioning strap fixture from the rubber buffers

 Only model 613.364/358/388.

5

Slacken tensioning straps at air cleaner housing (1)

 On model 613.364/358/388: slacken tensioning straps and take off.

6

Pull out air cleaner housing (1) to the front

 Ensure that no foreign matter gets into the exposed intake hose.

7

Remove air cleaner element

 To do this, open the locking clamps at the air cleaner housing (1), take off the air cleaner housing cover and take out the air cleaner element.



Inspecting

8

Inspect air cleaner element for soiling, install new element if necessary



Air cleaner element - inspect for soiling. Install new part according to condition

Engine 441.980 in model 613.355
Engine 402.970, 446.938 in
models 613.455/485

Engine 457.944 in model 613.358/388

AP09.10-T-0951A

Engine 441.980 in model 613.364/365

AP09.10-T-0951B

9

Install in the reverse order