ar0716p1080gd

Remove/install injection lines of common rail diesel injection (CDI)

Typ ar · téma 07.16 · verze 0401 · 2009-01-14

Platí pro: ENGINE 668.940 /941 /942 in MODEL 168

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.16 Systém vstřikování paliva vznětového motoru Common-Rail — Řada 168 · Řada 668 (modely 940, 941, 942)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.13 Potrubí/hadice/ventil — Řada 168 · Řada 668 (modely 940, 941, 942)

AR07.16-P-1080GD

Remove/install injection lines of common rail diesel injection (CDI)

8.1.09

ENGINE 668.940 /941 /942 in MODEL 168

Remove/install injection lines of common rail diesel injection (CDI)

P07.16-0299-05

21/6 Injection line (rail-injector)

Modification notes

9.3.00

Figure modified from 20 Nm to 22 Nm

Figure in BA07.16-P-1005-01B for engine 668.940/941 modified

*BA07.16-P-1005-01B

5.2.02

Value modified from 22 Nm to 20 Nm

Value in series BA07.16-P-1005-01B modified on engine 668.940/941/942

*BA07.16-P-1005-01B

25.9.03

Value modified from 20 Nm to 23 Nm

Value in series 1005 modified for engine 668.940/941/942

*BA07.16-P-1005-01B

Remove/Install

1

Remove induction module

AR09.20-P-1400GD

2

Remove oil filler neck with crankcase ventilation

AR01.20-P-9530GD

Danger!

Risk of explosion if ignition takes place, risk of poisoning caused by inhaling fuel vapors or swallowing fuel as well as risk of injury to skin and eyes exposed to fuel.

No fire, sparks, naked flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

3

Unscrew union nuts at both sides of injection lines (21/6)

Counterhold with wrench at the threaded connections of the injectors.
On no account exceed the tightening torque in order to avoid also slackening the threaded connection the next time

*000589770300

*BA07.16-P-1005-01B

4

Remove injection lines (21/6)

Do not crimp or bend lines when removing and installing.
After disconnecting the injection lines, seal connections of the injection lines.
Ensure scrupulous cleanliness!

Installation: Ensure exact seating of the injection lines. Inspect sealing cone at the lines, replace line if compression points exist.
To install the injection lines free of stress, slacken the rail in order to avoid any risk of the line fracturing. Do not tighten rail fully until after fitting on the injection lines. Refer to:

Remove/install rail

AR07.03-P-1010GD

5

Install in the reverse order

Common rail diesel injection (CDI)

Number

Designation

Engine 668.940/
941/942

BA07.16-P-1005-01B

Union nut of pressure line to high pressure pump/rail/injector

Nm

23

Remove/install injection lines of common rail diesel injection (CDI)

000 589 77 03 00

Ring wrench socket

Odkazované dokumenty