AR07.15-W-2000-05R | Measure fuel intake pressure upstream of fuel pump | ||
| Notes on possible sources of fault in the low-pressure fuel circuit |
Check values of fuel pressure
Number | Designation | Engine | ||
BE47.00-N-1004-01B | Fuel suction pressure upstream of fuel pump at filter supply | Breakaway speed | bar | -0.4 to -0.5 |
Fuel pipes/hoses
Number | Designation | Engine | ||
BA47.25-N-1008-01J | Nut, feed and return line to fuel filter | Nm | 45 | |
617 589 04 21 00
Tester
Adapter parts
541 589 00 91 00
W07.15-1474-06
1 Detach fuel feed line (4) on fuel prefilter (1) connection "VL" (1.1).
Collect escaping fuel.
2 Install test equipment (2) with test lines (2.1) and adapter (3) between fuel feed line (4) and fuel prefilter (1) connection "VL" (1.1).
Check sealing rings at connection (2.2) for damage, replace if necessary. The connection (2.2) with opening arm (arrow) must press on check valve in connection "VL" (1.1).
3 Removing and attaching test equipment (2) on vehicle frame.
4 Start engine, bleed fuel system and let engine run.
5 At maximum governed rpm of 2500 rpm, read off fuel intake pressure at test equipment (2) and compare with "fuel intake pressure upstream of fuel pump at filter supply" test value.
6 Switch off engine.
7 Detach test equipment (2) with test lines (2.1) and adapter (3).
Collect escaping fuel.
8 Attach fuel feed line (4) to fuel prefilter (1) connection "VL" (1.1) .
Install new sealing rings.
Odkazované dokumenty
- ah0715n100002f Pokyny k možným příčinám závad v nízkotlakém palivovém okruhu