Install testing/measuring equipment for leak testing of fuel system in low-pressure fuel circuit

AR07.15-G-2000-23CI

Install testing/measuring equipment for leak testing of fuel system in low-pressure fuel circuit

 Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW



Plug for fuel line

WF58.50-W-4725-01A

Engine

541.9, 542.9, 941.9, 942.9 in model 000.001

 Fuel lines/hoses

Number

Designation

ENGINE 541.9, 542.9, 941.9, 942.9

BA47.25-N-1004-01L

Banjo bolt, fuel line to fuel filter housing

Nm

50

1

 Install test equipment (2) on fuel filter housing   .

2

Disconnect fuel return line (3) and fuel feed line (4) at connection and remove O-ring at connector coupling.

 For this purpose, release retaining cap, press together retainer and pull plug out of connector coupling. Do not damage O-rings.

3

Seal fuel return line (3) with self-produced end cap (5).

4

Install adapter (1.2) and compressed-air filling line with stopcock (1.1) on fuel feed line (4).

1.1

Compressed air filling line with stopcock and banjo union

1.2

Adapter element

2

Tester

3

Fuel return line

4

Fuel feed line

5

Connecting piece