ar0703g6833dd

Clean nozzle holder combination

Typ ar · téma 07.03 · verze 0200 · 2019-08-23

Platí pro: Engine 900.91/92 in model 000.001 Engine 902.91/93 in model 000.001 Engine 904.94/95/96/97 in model 000.001 Engine 906.93/94/95/96/98/99 in model 000.001 Engine 924.91/93/94 in model 000.001 Engine 925.9 in model 000.001 Engine 926.91/92/93/95/97/98 in model 000.001

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.03 Vstřikovací trysky, vstřikovací ventily, vedení — Řada 000 (modely 001) · Řada 900 (modely 91*, 92*) · Řada 902 (modely 91*, 93*) · Řada 904 (modely 94*, 95*, 96*, 97*) · Řada 906 (modely 93*, 94*, 95*, 96*, 98*, 99*)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.42 Rozdělovač paliva / rail / tryska / vstřikovač — Řada 000 (modely 001) · Řada 900 (modely 91*, 92*) · Řada 902 (modely 91*, 93*) · Řada 904 (modely 94*, 95*, 96*, 97*) · Řada 906 (modely 93*, 94*, 95*, 96*, 98*, 99*)

Platí také pro motory/převodovky: 924 91*, 924 93*, 924 94*, 925 9**, 926 91*, 926 92*, 926 93*, 926 95*, 926 97*, 926 98*

AR07.03-G-6833DD

Clean nozzle holder combination

08.08.2019

Engine

900.91/92 in model 000.001

Engine

902.91/93 in model 000.001

Engine

904.94/95/96/97 in model 000.001

Engine

906.93/94/95/96/98/99 in model 000.001

Engine

924.91/93/94 in model 000.001

Engine

925.9 in model 000.001

Engine

926.91/92/93/95/97/98 in model 000.001

Modification notes

08.08.2019

Operation steps 6 and 7, added.

Clean nozzle holder combination

1

Nozzle holder combination

2

High-performance ultrasound cleaning equipment

3

Perforated cover

W07.03-1011-02

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Clean

1

Remove nozzle holder assembly (1).

AR07.03-G-6831DD

2

Fill high-performance ultrasound cleaning equipment (2) with cleaning fluid and heat up to 60 °C.

Mix cleaner with water in the ratio 1:2 and pour in up to the marking.
Filling capacity approx. 1.5 l.

Cleaner, P3 Neuproton 5032

*BR00.45-Z-1033-04A

3

Insert perforated cover (3) into the high-performance ultrasound cleaning equipment (2) and place nozzle holder assembly (1) vertically into the perforated cover (3).

4

Switch on high-performance ultrasound cleaning equipment (2) and clean nozzle holder assembly (1).

Observe notes from the manufacturer.

5

Install nozzle holder assembly (1).

AR07.03-G-6831DD


Install nozzle holder assembly (1) no later than 4 hours after cleaning.
Otherwise, corrosion of the needle can cause the nozzle holder assembly (1) to malfunction.

6

Start engine immediately after installing the nozzle holder assembly (1) and allow engine to run.

The fuel system is ventilated automatically.
See information from body manufacturer.

7

Switch off engine.

Repair materials

Number

Designation

Order number

BR00.45-Z-1033-04A

Cleaner, P3 Neuproton 5032

Bandelin Elektronic GmbH & Co. KG
3-4
12207 Berlin
Germany
Tel.: +49 30 768800
Fax +49 30 77346 99
http://www.bandelin.com

Odkazované dokumenty