AR07.00-P-1000-02I | Test and adjustment values for exhaust emission test I | Model 114 |
Model | 114.010/021 | 114.011/023 | 114.005/007/008/ | 114.022 | 114.060/073 |
Sales designation | 250/250 C | 250/250 C | 230/230.6 | 250 CE | 280/280 C |
Engine | 114.920 | 130.923 | 180.954 | 114.980 | 110.921 |
Version | Standard | Standard | Standard | Standard | Standard |
Idle speed rpm | 800-900 | 800-900 | 800-900 | 750-850 | 800-900 |
Dwell angle (at idle speed) 1) |
|
|
|
|
|
Ignition angle without vacuum |
|
|
|
|
|
Model | 114.010/021 | 114.011/023 | 114.005/007/008/ | 114.022 | 114.060/073 |
Sales designation | 250/250 C | 250/250 C | 230/230.6 | 250 CE | 280/280 C |
Engine | 114.920 | 130.923 | 180.954 | 114.980 | 110.921 |
Version | Standard | Standard | Standard | Standard | Standard |
Exhaust level (at idle speed) |
|
|
|
|
|
Use of harder valve seat rings |
|
|
|
|
|
1) Figure underlined is the setting.
2) Perform CO measurement and setting upstream of catalytic converter only if e.g. the max. permissible CO level at
exhaust tailpipe is exceeded during emissions test.
5) In the case of distributor with Bosch no. 0 231 116 048; 371 and 331 before TDC
Model | 114.062/072 |
Sales designation | 280 E/280 CE |
Engine | 110.981 |
Version | Standard |
Idle speed rpm | 750-850 |
Dwell angle (at idle speed) 1) |
|
Ignition angle without vacuum |
|
Model | 114.062/072 |
Sales designation | 280 E/280 CE |
Engine | 110.981 |
Version | Standard |
Exhaust level (at idle speed) |
|
Use of harder valve seat rings |
|
1) Figure underlined is the setting.
2) Perform CO measurement and setting upstream of catalytic converter
only if e.g. the max. permissible CO level at exhaust tailpipe is exceeded during emissions test.