ar0330s5000a

Remove/install retaining lock for crankshaft / ring gear

Typ ar · téma 03.30 · verze 0200 · 2007-04-30

Platí pro: ENGINE 111 in MODEL 638

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 03 Pohonná jednotka › 03.30 Setrvačník, unašeč, tlumič kmitů, ozubený věnec startéru — Řada 638

EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.41 Klikový hřídel/setrvačník/lamela spojky — Řada 638

Platí také pro motory/převodovky: 111 ***

AR03.30-S-5000A

Remove/install retaining lock for crankshaft / ring gear

18.4.07

ENGINE 111 in MODEL 638

Remove/install retaining lock for crankshaft / ring gear

D03.30-1000-05

1 Retaining lock

2 Starter

Modification notes

6.3.07

Method completely changed

Operation steps 1 to 3

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove starter (2)

Do not remove electrical lines on starter (2).

AR15.30-S-7100A

2

Insert retaining lock (1) at starter opening in starter ring gear

If necessary turn engine in its direction of rotation at crankshaft until the toothing engages, see:

Rotate engine at crankshaft

AR01.00-S-0120A

Retaining lock

*602589004000

3

Install in the reverse order

Remove/install retaining lock for crankshaft / ring gear

602 589 00 40 00

Retaining lock

Odkazované dokumenty