ar0330p8001w

Remove/install flywheel / drive plate

Typ ar · téma 03.30 · verze 0100 · 2011-02-10

Platí pro: ENGINES 276 in MODEL 172

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 03 Pohonná jednotka › 03.30 Setrvačník, unašeč, tlumič kmitů, ozubený věnec startéru — Řada 172

EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.41 Klikový hřídel/setrvačník/lamela spojky — Řada 172

Platí také pro motory/převodovky: 276 ***

AR03.30-P-8001W

Remove/install flywheel / drive plate

20.1.11

ENGINES 276 in MODEL 172

Remove/install flywheel / drive plate

P03.30-2154-12

1 Driven plate

1a Screw

2 Cylinder pin

3 Threaded tool

Remove/install

1

Remove transmission with torque converter

AR27.10-P-0500W

2

Install retaining lock for crankshaft/starter ring gear

AR03.30-P-5000W

3

Remove bolts (1a) from drive plate (1)

Do not use an impact wrench/driver or compressed air tool in order to unscrew and screw in the bolts (1a), otherwise the threads in the crankshaft flange will be damaged.

AR03.30-P-8001-02MM

Installation: Replace bolts (1a).

*BA03.30-P-1002-01M

4

Remove drive plate (1) from crankshaft flange

Installation: The cylinder pin (2) determines the installation location of drive plate (1).

Checking

5

Check threaded union (3) in drive plate (1)

In case of damaged or loose threaded unions (3), drive plate (1) must be replaced.

6

Install in the reverse order

7

Carry out first initialization and then sensor rotor adaptation using STAR DIAGNOSIS

Only when replacing

AD00.00-P-2000-04A

Menu guidance:

Engine control module

Adaptations

Learning processes

Flywheel, driven plate, vibration damper, starter ring gear

Number

Designation

Engine
276

BA03.30-P-1002-01M

Bolt, starter ring gear/
drive plate to crankshaft

Stage 1

Nm

20

Stage 2

Nm

45

Stage 3

°

90

Odkazované dokumenty