ar0330p1600fb

Removing/installing the belt pulley/vibration damper

Typ ar · téma 03.30 · verze 0101 · 2005-04-05

Platí pro: ENGINE 122.950 in MODEL 454.0

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 03 Pohonná jednotka › 03.30 Setrvačník, unašeč, tlumič kmitů, ozubený věnec startéru — Řada 454 (modely 0**)

EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.41 Klikový hřídel/setrvačník/lamela spojky — Řada 454 (modely 0**)

EinPAS 15 Motor › 15.18 Řemenový pohon › 15.18.30 Řemen/řemenice/napínací ústrojí/vratná kladka — Řada 454 (modely 0**)

Platí také pro motory/převodovky: 122 950

AR03.30-P-1600FB

Removing/installing the belt pulley/vibration damper

3.2.05

ENGINE 122.950 in MODEL 454.0

Removing/installing the belt pulley/vibration damper

1 Poly-V-belt

2 Belt pulley

3 Bracket

4 Bolt

P03.30-2113-03

Removing/installing

1

Remove alternator poly-V-belt

AR13.22-P-1202FC

2

Lay poly-V-belt (1) around the belt pulley (2) and fix in place with a cable tie (arrow)

Do not use anything other than the vehicle's own poly-V-belt (1) since this could damaged disassembling the belt pulley (2).

3

Lead poly-V-belt (1) over the bracket (3)

4

Remove bolt (4) through the access opening in the fender liner

Installation: Clean bolt (4) and the tapped hole in the crankshaft.

Coat bolt thread (4) with engine oil.

The poly-V-belt (1) with cable tie (arrow) must be moved through 180° to tighten the bolt (4) on the belt pulley (1).

*BA03.30-P-1002-01L

5

Remove belt pulley (2)

6

Install in reverse order

Flywheel, driven plate, vibration damper, starter ring gear

Number

Designation

Engine
122.950

BA03.30-P-1002-01L

Central bolt for belt pulley on crankshaft

1st stage

Nm

181

2nd stage

°

-

Odkazované dokumenty