Removing and installing belt pulley/vibration damper

AR03.30-D-1600B

3.4.96

ENGINE 601.943 in MODEL 901, 902, 903, 904

D03.30-0004-06

1 Belt pulley with hub

2 Crankshaft oil seal

3 Hexagon bolt

4 Conical washer

 	Removing, installing
1	Remove radiator		AR20.20-D-3865B
2	Remove viscous fan clutch		AR20.40-D-5660A
3	Remove poly V-belt		AR13.22-D-1202B
4	Install retaining lock for crankshaft/starter ring gear		AR03.30-D-5000A
5	Unscrew bolt (3) and remove conical washer (4)	Installation: Use new bolt (3)
			*BA03.30-N-1001-01B
6	Pull off belt pulley with hub (1).	If the hub is stuck, screw a bolt into the crankshaft and use the puller.  Installation: The groove in the hub must be aligned with the woodruff key on the crankshaft journal.
			*000589883300
7	Replace front crankshaft radial seal (2)		AR03.20-D-3000A
8	Install in the reverse order

 Flywheel, drive plate, vibration damper, starter ring gear

Number	Designation			Engine 601.943


BA03.30-N-1001-01B	Central bolt, belt pulley/vibration damper to crankshaft	1st stage	Nm	200...220
		2nd stage	°	90...100

000 589 88 33 00

Two-arm puller