ar0320g4803dd

Remove/install crankshaft sprocket

Typ ar · téma 03.20 · verze 0107 · 2019-10-04

Platí pro: Engine 900.91/92 in model 000.001 Engine 902.91/93 in model 000.001 Engine 904.94/95/96/97 in model 000.001 Engine 906.90/93/94/95/96/98/99 in model 000.001 Engine 924.91/93/94 in model 000.001 Engine 925.9 in model 000.001 Engine 926.91/92/93/95/97/98 in model 000.001

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 03 Pohonná jednotka › 03.20 Klikový hřídel — Řada 000 (modely 001) · Řada 900 (modely 91*, 92*) · Řada 902 (modely 91*, 93*) · Řada 904 (modely 94*, 95*, 96*, 97*) · Řada 906 (modely 90*, 93*, 94*, 95*, 96*, 98*, 99*)

EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.41 Klikový hřídel/setrvačník/lamela spojky — Řada 000 (modely 001) · Řada 900 (modely 91*, 92*) · Řada 902 (modely 91*, 93*) · Řada 904 (modely 94*, 95*, 96*, 97*) · Řada 906 (modely 90*, 93*, 94*, 95*, 96*, 98*, 99*)

EinPAS 15 Motor › 15.17 Rozvod motoru › 15.17.34 Řetězový pohon/ozubený řemen/ozubený pohon — Řada 000 (modely 001) · Řada 900 (modely 91*, 92*) · Řada 902 (modely 91*, 93*) · Řada 904 (modely 94*, 95*, 96*, 97*) · Řada 906 (modely 90*, 93*, 94*, 95*, 96*, 98*, 99*)

Platí také pro motory/převodovky: 924 91*, 924 93*, 924 94*, 925 9**, 926 91*, 926 92*, 926 93*, 926 95*, 926 97*, 926 98*

AR03.20-G-4803DD

Remove/install crankshaft sprocket

15.08.2019

Engine

900.91/92 in model 000.001

Engine

902.91/93 in model 000.001

Engine

904.94/95/96/97 in model 000.001

Engine

906.90/93/94/95/96/98/99 in model 000.001

Engine

924.91/93/94 in model 000.001

Engine

925.9 in model 000.001

Engine

926.91/92/93/95/97/98 in model 000.001

Remove/install crankshaft sprocket

1

Crankshaft gear

2

Crankshaft

3

Dowel pin

4

Centering drifts

5

Camshaft sprocket

W03.20-1103-06

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

Notes on work safety regulations for vehicles with natural gas-powered engines

AH00.10-N-1000-04A

Remove/install

1

Remove timing case.

AR01.60-G-8200DD

2

Turn crankshaft (2) until the markings (arrows) of the crankshaft gear (1) and camshaft sprocket (5) coincide.

Screw centering drift (4) into two opposing threaded holes on the crankshaft (2) and turn the crankshaft (2) using a suitable lever.

Alignment punch

*904589026300

3

Pull crankshaft gear (1) off the crankshaft (2).

Installation: Markings (arrows) on crankshaft gear (1) and camshaft sprocket (5) must be positioned opposite each other.

4

Check dowel pin (3) for wear.

If wear is present,

replace dowel pin (3).

5

Install in the reverse order

Remove/install crankshaft sprocket

904 589 02 63 00

Alignment punch

Odkazované dokumenty