I01.45-0003-06
1 Oil pan
2 Seal
3 Bolt
4 Oil dipstick guide tube
5 Sealing ring
6 Oil drain screw
7 Engine wiring harness
B14 Engine oil level sensor
| Remove/install | ||
1 | Extract or drain engine oil | Installation: Ensure that the oil drain screw (6) is installed before pouring in engine oil. | |
| Engine oil and filter change | ||
2 | Detach dipstick guide tube (4) at oil pan (1) | ||
3 | Disconnect electric cable of engine oil level sensor (B14) at electrical engine wiring harness (7) | ||
4 | Remove oil pan (1) | Installation: Replace seal (2), observe installation position of seal (2). | |
| |||
5 | Remove engine oil level sensor (B14) | Only when installing a new oil pan (1). | |
| |||
6 | Clean oil pan (1) and sealing surface on cylinder crankcase | ||
7 | Install in the reverse order |
Oil pan
Number | Designation | Engine | ||
BA01.45-N-1001-01B | Bolt, oil pan to crankcase | Nm | 25 | |
Oil level, oil pressure sensor