Remove/install cover of camshaft sprocket · ar0140t8921cb · Mercedes-Benz WIS

AR01.40-T-8921CB

Remove/install cover of camshaft sprocket

16.10.09

ENGINES 457.944 in model NMB613.367

T01.40-0042-02

1 Tensioning device

2 Carrier

3 Vibration damper

4 Cover of camshaft sprocket

 	Remove/install
1	Open engine compartment flap at rear
2	Remove rear crossmember		AR61.10-T-6100C
3	Remove tensioning device (1)		AR13.25-T-3200CB
4	Remove tensioning device (1) carrier (2)		*BA01.40-N-1002-01L
5	Remove vibration damper (3) for crankshaft		AR03.30-T-1600CB
6	Remove camshaft sprocket (4) cover from crankcase	 Installation: Clean sealing surfaces. Coat camshaft sprocket (4) cover with sealant.
			*BA01.40-N-1002-01L
		Sealant	*BR00.45-Z-1012-01A
7	Install in the reverse order

 Crankcase, timing case cover, end cover

Number	Designation		Engine 457.9


BA01.40-N-1002-01L	Bolt, camshaft sprocket cover to crankcase	Nm	50

Repair materials

Number	Designation	Order number
BR00.45-Z-1012-01A	Omnifit FD 3041 sealant	A 002 989 47 20 10