| Checking | ||
Danger! | Risk of death caused by body parts being pulled in by rotating vehicle wheels and roller dynamometer rollers | Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Safeguard roller dynamometer from unauthorized access. | |
1 | Drive the vehicle onto the brake test stand and measure and enter deceleration values for service brake at the front axle and rear axle into the maintenance sheet | Permissible deviation from the higher value: Maximum 25 %. If the braking effect is uneven or inadequate, establish the cause and eliminate against a separate order: | |
Check lining thickness of brake pads and condition of brake disks | Model 454 except code 30Y Disk brakes on rear axle | ||
Model 454 with code 30Y Disk brakes on rear axle | |||
2 | Engage parking brake, measure and note deceleration values | Permissible deviation from the higher value: Maximum 25 %. If the braking effect is uneven or inadequate: | |
| Adjust parking brake | ||
If the braking effect is uneven or inadequate, establish the cause and eliminate against a separate order: | |||
Remove brake drum or brake disk and determine or eliminate cause (e.g. replace brake pads, brake drum or brake disk): | |||
| Remove/install rear axle brake disc | Model 454 with code 30Y Disk brakes on rear axle | |
| Remove/install brake drum | Model 454 except code 30Y Disk brakes on rear axle | |
Check components of parking brake for signs of wear and damage, replace if necessary. | |||
3 | Drive vehicle off the brake test stand |
Odkazované dokumenty
- ap4210p4251ff
- ap4210p4251fg
- ar4210p0240ff
- ar4210p1010ff
- ar4220p0540ff
- as0000z001901a Ohrožení života při vtažení rotujícími koly vozidla a vodicí kladkou na válcovémzkušebním stavu