P42.20-2184-04
1 Beverage holder
2 Handbrake lever
3 Cover
4 Nut
Adjust | |||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates below the lifting platform support points specified by the vehicle manufacturer. | |
1 | Lift up the vehicle until the wheels rotate freely | ||
2.1 | Lift cover (3) at rear and pull out beverage holder (1) | On vehicles without code (S29) Multifunction armrest (DFO/FFO) | |
2.2 | Remove center armrest | On vehicles with code (S29) Multifunction armrest (DFO/FFO) | |
3 | Adjust parking brake by turning the nut (4) | It must no longer be possible to turn the rear wheels by hand after the hand brake lever (2) has been moved to the 3rd detent. The rear wheels must turn freely when the hand brake lever (2) is released. | |
4 | Operate the hand brake lever (2) several times and release again | ||
5 | Check the parking brake adjustment | ||
6.1 | Insert beverage holder (1) and clip in cover (3) | On vehicles without code (S29) Multifunction armrest (DFO/FFO) | |
6.2 | Install center armrest | On vehicles with code (S29) Multifunction armrest (DFO/FFO) |
Odkazované dokumenty
- ar6820p2025ff
- as0000z001001a Nebezpečí ohrožení života v případě sesunutí nebo překlopení vozu z dílenského zvedáku