AP42.00-A-4255A | Service and parking brake - function test | 5.4.01 |
MODELS NAB372.124 with FRONT AXLE 733.015 /201 with REAR AXLE 745.800
MODELS NAB372.317 with FRONT AXLE 733.015 with REAR AXLE 745.800
| Check | ||
1 | Check brake lining thickness | ||
2 | Check condition of brake mechanism | ||
3 | Check brake system for leaks | Before starting the test ensure that the compressed-air system reservoirs are filled sufficiently with air. The compressed air lines of the brake system should be subjected to a visual inspection and an acoustic test. | |
4 | Apply service brake | Before starting the test ensure that the compressed-air system reservoirs are filled sufficiently with air. Have an assistant observe whether the movement at the brake levers of the front wheel brake or rear wheel brake is faultless. | |
5 | Operate parking brake | Before starting the test ensure that the compressed-air system reservoirs are filled sufficiently with air. Have an assistant observe whether the movement at the brake levers of the rear wheel brake is faultless. | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine | Secure vehicle to prevent it from moving. | |
6 | Start engine | ||
7 | Carry out brake test | If necessary observe the legislation specification of the respective country. | |
8 | Turn off engine |
Odkazované dokumenty
- ap4210a4253a
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru