AP42.00-A-4255A | Service and parking brake - function test | 5.4.01 |
MODELS NAB372.124 with FRONT AXLE 733.015 /201 with REAR AXLE 745.800
MODELS NAB372.317 with FRONT AXLE 733.015 with REAR AXLE 745.800
| Check | ||
1 | Check brake lining thickness | ||
2 | Check condition of brake mechanism | ||
3 | Check brake system for leaks | Before starting the test ensure that the compressed-air system reservoirs are filled sufficiently with air. The compressed air lines of the brake system should be subjected to a visual inspection and an acoustic test. | |
4 | Apply service brake | Before starting the test ensure that the compressed-air system reservoirs are filled sufficiently with air. Have an assistant observe whether the movement at the brake levers of the front wheel brake or rear wheel brake is faultless. | |
5 | Operate parking brake | Before starting the test ensure that the compressed-air system reservoirs are filled sufficiently with air. Have an assistant observe whether the movement at the brake levers of the rear wheel brake is faultless. | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine | Secure vehicle to prevent it from moving. | |
6 | Start engine | ||
7 | Carry out brake test | If necessary observe the legislation specification of the respective country. | |
8 | Turn off engine |
Referenced documents
- ap4210a4253a Check brake lining thickness
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.