ap3530t3560a

Rear axle - adjusting adjustment screw with sliding block

Typ ap · téma 35.30 · verze 0102 · 2005-07-12

Platí pro: REAR AXLE 745.861 in MODEL 613.355 REAR AXLE 745.862 in MODEL 613.455 /485 REAR AXLE 745.997 in MODEL 613.358 /388

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.30 Pohon, hnací hřídele — Řada 613 (modely 355, 358, 388, 455, 485)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.30 Zadní náprava kompletní — Řada 613 (modely 355, 358, 388, 455, 485)

EinPAS 17 Hnací ústrojí/náprava › 17.52 Přídavná náprava › 17.52.30 Kompletní přídavná náprava — Řada 613 (modely 355, 358, 388, 455, 485)

Platí také pro motory/převodovky: 745 861, 745 862, 745 997

AP35.30-T-3560A

Rear axle - adjusting adjustment screw with sliding block

22.10.98

REAR AXLE 745.861 in MODEL 613.355

REAR AXLE 745.862 in MODEL 613.455 /485

REAR AXLE 745.997 in MODEL 613.358 /388

Rear axle - adjusting adjustment screw with sliding block
Rear axle - adjusting adjustment screw with sliding block
Rear axle - adjusting adjustment screw with sliding block

T35.30-0005-01

T35.30-0004-01

T35.30-0003-01

1 Adjusting bolt

2 Counternut

Adjustment screw with slot

1 Adjusting bolt

2 Counternut

3 Sliding block

Adjustment screw with hexagon socket

1 Adjusting bolt

2 Counternut

3 Sliding block

Setting

1

Slacken and hold locknut (2)

2

Screw in adjustment screw (1) until the sliding block (3) touches the crown wheel

3

Set gap by unscrewing adjusting screw (1)

1/8 revolution.

4

Tighten locknut (2)

Hold adjusting screw (1) while doing this.