ap2520t2981ca

Clutch actuation - replace brake fluid

Typ ap · téma 25.20 · verze 0104 · 2006-07-26

Platí pro: ENGINE 457.944 in MODEL NMB613.367 with TRANSMISSION 714.120 ENGINE 457.941 in MODEL NMB613.368 with TRANSMISSION 714.120

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 25 Spojka › 25.20 Ovládání spojky — Řada 613 (modely 367, 368)

EinPAS 17 Hnací ústrojí/náprava › 17.15 Spojka › 17.15.5 Ovládání spojky — Řada 613 (modely 367, 368)

Platí také pro motory/převodovky: 457 941, 457 944, 714 120

AP25.20-T-2981CA

Clutch actuation - replace brake fluid

16.1.06

ENGINE 457.944 in MODEL NMB613.367 with TRANSMISSION 714.120

ENGINE 457.941 in MODEL NMB613.368 with TRANSMISSION 714.120

Clutch actuation - replace brake fluid
Clutch actuation - replace brake fluid

T25.20-0020-02

Shown on model 613.368

1 Expansion reservoir cap

2 Protective cap

3 Bleeder screw

4 Clutch servo assistance

T25.20-0027-02

Remove

1

Open left hatch in footwell

2

Detach lower engine compartment paneling

Only carry out the steps for removing the paneling under the transmission.

AR61.20-T-1105CA

Danger!

Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes.

Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

3

Screw down expansion reservoir cap (1) and draw off the old brake fluid

Syringe

*WH58.30-Z-1001-16A

Connecting

4

Connect bleeder unit to clutch expansion reservoir

Adjust working pressure of the bleeding unit in accordance with the equipment manufacturer's specifications.

Brake fluids (DOT 4 plus)

Sheet 331.0

BB00.40-P-0331-00A

Bleeder unit, pneumatic

*WH58.30-Z-1001-24A

Bleeder unit, electric

*WH58.30-Z-1003-24A

5

Pull down protective cap (2) and connect bleeder unit to the bleed screw (3)

6

Switch on bleeder unit and bleed the clutch operator

Open the bleed screw (3) and leave open until the brake fluid escapes without any bubbles. Then close the bleed screw (3).

Remove

7

Detach bleeder unit from the bleed screw (3)

8

Detach bleeder unit from the clutch expansion reservoir

Check

9

Check fluid level in expansion reservoir and correct if necessary

AP25.20-T-2910CA

10

Screw cap (1) onto expansion reservoir

11

Check proper function of clutch operator

Check bleed screw (3) for leaks, then put on protective cap (2).

Install

12

Close the hatch in the footwell

Commercially available tools

Number

Designation

WH58.30-Z-1001-16A

Syringe

WH58.30-Z-1001-24A

Bleeder unit, pneumatic

WH58.30-Z-1003-24A

Electric brake fluid change/bleeder unit

Odkazované dokumenty