an6030s0013p

Retrofit edge guard to platform

Typ an · téma 60.30 · verze 0101 · 2019-07-17

Platí pro: Model 470, 471 with code W1B (Rear window protection) with code Y1O (Load bed trim) except code Y1Q (Polished roll bar (styling bar)) except code Y1R (Black roll bar (styling bar)) except code Y1T (Soft cover) Model 470, 471 with code Y1O (Load bed trim) with code Y1Q (Polished roll bar (styling bar)) Model 470, 471 with code Y1O (Load bed trim) with code Y1R (Black roll bar (styling bar)) Model 470, 471 with code Y1O (Load bed trim) with code Y1T (Soft cover) except code Y1Q (Polished roll bar (styling

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 60 Nástavba všeobecně › 60.30 Valník — Řada 470 · Řada 471

EinPAS 35 Karoserie/rám/montované díly › 35.76 Valník / sklápěcí zařízení › 35.76.3 Dodatečná montáž/přemontování — Řada 470 · Řada 471

AN60.30-S-0013P

Retrofit edge guard to platform

02.07.2019

Model

470, 471

with code W1B (Rear window protection)

with code Y1O (Load bed trim)

except code Y1Q (Polished roll bar (styling bar))

except code Y1R (Black roll bar (styling bar))

except code Y1T (Soft cover)

Model

470, 471

with code Y1O (Load bed trim)

with code Y1Q (Polished roll bar (styling bar))

Model

470, 471

with code Y1O (Load bed trim)

with code Y1R (Black roll bar (styling bar))

Model

470, 471

with code Y1O (Load bed trim)

with code Y1T (Soft cover)

except code Y1Q (Polished roll bar (styling bar))

except code Y1R (Black roll bar (styling bar))

Retrofit edge guard to platform

1

Edge guard

2

Edge guard

S60.30-A030-06

Retrofit edge guard to platform

1

Edge guard

3

Rear window protective grille

S60.30-A037-06

Retrofit edge guard to platform

1

Edge guard

4

Protective foils

S60.30-A031-06

Retrofit edge guard to platform

2

Edge guard

5

Protective foils

S60.30-A032-06

Retrofit edge guard to platform

1

Edge guards

2

Edge guard

S60.30-A033-06

General note on listed repair materials

AH60.00-N-0000-02P

Install

1

Clean contact surfaces of the edge guards (1, 2).

Cleaner

*BR00.45-Z-1025-04A

2

Apply separation line (area A) to the edge guards (1) as shown.

Model 470, 471 with code W1B (rear window protection)

To do this, place edge guards (1) on the platform paneling and mark separation lines (area A) at the installation height of the rear window protective grille (3).

3

Carry out respective cut (area A) on edge guards (1).

Model 470, 471 with code W1B (rear window protection)

4

Place edge guards (1) on platform paneling and align.

Place edge guards (1) flush on the contours of the platform paneling.
Helper required.

5

Detach protective foils (4) on the edge guards (1).

6

Attach edge guards (1) to the platform paneling.

To do this, press the edge guards (1) from the outside flush onto the contours of the platform paneling from the rear to the front (arrow C).
Helper required.

7

Press on edge guards (1) from the top.

8

Place edge guard (2) on the rear dropside and align.


The edge guard (2) must lie flush on the contour of the dropside.
Otherwise, this can result in damage during loading and unloading.

The edge guard (2) must cover the truckbed liner without a gap.
Helper required.

9

Detach protective foils (5) from the edge guard (2).

10

Install edge guard (2) on the rear dropside.


The edge guard (2) must cover the truckbed liner without a gap and lie flush on the contour of the dropside.
Otherwise, this can result in damage during loading and unloading.

To do this, press edge guard (2) from the outside onto the contours of the rear dropside from right to left (arrow B).
Helper required.

11

Press edge guard (2) from the top.

Repair materials

Number

Designation

Order number

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71

Odkazované dokumenty