S60.30-0047-08
1 | Locking bolt | 5 | Nut | 9 | Screw | ||
2 | Platform partitioning grille | 6 | Washer | 10 | Mounting plate | ||
3 | Left bracket | 7 | Spring | 11 | Spacer | ||
4 | Right bracket | 8 | Shim |
S60.30-0048-09
Shown on left side of vehicle |
1 | Locking bolt | 8 | Shim | 13 | Guide sleeve | ||
3 | Left bracket | 10 | Mounting plate | 14 | Screw | ||
7 | Spring | 12 | Tie-down rail | a | Dimension (1 mm) |
S60.30-0087-09
2 | Platform partitioning grille | 5 | Nuts | 11 | Spacers | ||
3 | Left bracket | 6 | Shims | ||||
4 | Right bracket | 9 | Bolts |
| Install | ||
1 | Install mounting plates (10) in tie-down rails (12) | ||
2 | Insert left bracket (3) and right bracket (4) in tie-down rails (12) | ||
3 | Adjust guide rollers (13) of left bracket (3) and right bracket (4) | To do this, loosen bolt (14), apply respective guide roller (13) to tie-down rail (12), and tighten bolt (14). | |
| Check | ||
4 | Check whether left bracket (3) and right bracket (4) can still be moved in the tie-down rails (12) | If left bracket (3) or right bracket (4) can no longer be moved | |
| |||
Re-adjust the guide roller (13). | |||
5 | Screw in locking bolts (1) with spacer disks (8) and springs (7) as shown in respective mounting plate (10) | ||
6 | Insert platform partitioning grille (2) into left bracket (3) and right bracket (4) | The brand logo of the platform partitioning grille (2) must face the rear. | |
7 | Attach platform partitioning grille (2) to left bracket (3) and right bracket (4) | | |
For this reason, insert both spacers (11) in grooves on underside of platform partitioning grille (2) and fix bolts (9), as shown, with nuts (5) and washers (6). | |||
Bolt, platform partitioning grille to bracket | |||
8 | Enter special equipment via Vehicle Documentation (VeDoc) | Designation of corresponding special equipment: Code Y1L (cargo area separation system). | |
Attach note "platform partitioning grille retrofitted as per AN60.30-S-0002P" under field organization texts for DG 60. |