an5418w100102pr

Install battery cable bracket

Typ an · téma 54.18 · verze 0100 · 2012-02-10

Platí pro: MODEL 970.0 /2 with TRANSMISSION 712.62 /63, 715.050 /060 with BODY 972.890 except CODE (B95) No antilock brake system except CODE (MK3) Variable vehicle speed limit 30 km/h and backup shift lock for refuse vehicles nicht in Verbindung mit getriebeabhängigem Nebenabtrieb MODEL 974.2 with TRANSMISSION 712.63, 715.060 with BODY 972.890 except CODE (B95) No antilock brake system except CODE (MK3) Variable vehicle speed limit 30 km/h and backup shift lock for refuse vehicles nicht in Verbindung mit getrie

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 54 Elektrické zařízení, výstroj a přístroje › 54.18 Kabelové svazky — Řada 970 (modely 0**, 2**) · Řada 972 (modely 890) · Řada 974 (modely 2**)

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.20 Elektrická síť vozidla › 25.20.3 Dodatečná montáž/přemontování — Řada 970 (modely 0**, 2**) · Řada 972 (modely 890) · Řada 974 (modely 2**)

Platí také pro motory/převodovky: 712 62*, 712 63*, 715 050, 715 060

AN54.18-W-1001-02PR

Install battery cable bracket

Danger!

Risk of death caused by working on permanent magnet retarder for groups of persons with implants. Risk of injury caused by burns that may occur due to contact with the hot rotor.

For persons with implants, a minimum distance of 30 cm between the permanent magnet retarder and the body parts of the affected person is to be maintained as a safe distance from the permanent magnet retarder.

Do not touch hot or rotating parts.

AS43.40-Z-0001-01A

Install battery cable bracket

W54.18-1108-11

1 Mount new bracket (9) onto transmission.

The new bracket (9) is fastened with one bolt only to the transmission.

Install battery cable bracket

W54.18-1109-11

2 Mount bracket (3, 4) with battery cable (5, 6) to new bracket (9).

Install battery cable bracket

W54.18-1110-11

3 Remove cable tie (10) and remove spacer (11).

Install battery cable bracket

W54.18-1111-11

4 Route subharness (12) upwards.

5 Fasten subharness (12) with spacer (11) and cable tie (13) to top hole of bracket (14).

Install battery cable bracket

W54.18-1112-11

6 Fasten new bracket (15) with bolt (16) to bracket (14).

7 Fasten battery cable (5, 6) with new bracket (17) to bracket (15).

Install battery cable bracket

W43.40-1030-06

8 Mount connector (1) to transmission output speed rpm sensor (B57).

Only with code (GE1) Automatic gear control (AGS).

9 Mount connector (2) to speed sensor (B17).

Odkazované dokumenty