P88.00-2245-09
1 Paneling
2 Bolt
5 Bracket
3 Water hose
4 Left wiper arm
| Remove/install | ||
1 | Remove left wiper arm (4) | ||
2 | Open engine hood | ||
3 | Remove water hose (3) from distribution element | Remove only water hose (3) coming from windshield washer reservoir from distribution element | |
4 | Unscrew bolt (2) on left and right on paneling (1) | ||
5 | Cover left wiper arm shaft (4) | Cover shaft to prevent damaging cover (1) during removal. | |
6 | Pull paneling (1) toward rear and loosen from brackets (5) on left and right | ||
7 | Remove paneling (1) between windshield and engine hood | Carefully loosen paneling (1) to prevent damaging paint. | |
Helper required Check bracket (5), replace if necessary | |||
8.1 | Unclip spray nozzles of windshield washer system from paneling (1) and remove with wash fluid hose. | Only when replacing paneling (1). | |
9 | Install in the reverse order | ||
10 | Check spray nozzle of windshield washer system for proper function, adjust spray nozzles if necessary. | ||
| Windshield wipers, windshield washer system - Function check |