P82.30-2298-04
1 Rear-end door wiper arm
2 Nut
3 Cap
| Remove | ||
Danger! | Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism | Always remove ignition key when working on windshield wiper mechanism. | |
1 | Open cap (3) | ||
2 | Unscrew nut (2) | ||
3 | Remove rear window wiper arm (1) | ||
| Install | ||
4 | Move rear-end door wiper motor to limit position | Switch ignition on, switch wiper system to setting "1" and then off again, wait until rear-end door wiper motor stops, then switch ignition off. | |
5 | Fit rear-end door wiper arm (1) to wiper shaft | Note installation position of rear-end door wiper arm (1). | |
6 | Tighten nut (2) | | |
7 | Close cap (3) | ||
8 | Perform function check |
Windshield wiper
引用的文档
- as8230z000101a 当四肢卡在风挡玻璃雨刮器机构中时,有夹伤和压伤的风险,极端的情况下甚至可能被切断。