P68.30-2880-04
1 Rear door edge guard
2 Retaining clip
3 Front door edge guard
4 Footwell paneling
5 Entrance plate
| Remove/install | ||
1 | Remove bottom paneling from B-pillar | ||
2 | Remove rear door edge guard (1) and front door edge guard (3) in area of door sill molding (5) and footwell paneling (4). | Door sill moldings shown with seat removed for better illustration | |
3 | Loosen footwell paneling (4) in area of door sill molding | ||
4 | Remove retaining clips (2) from door sill molding (5). | ||
5 | Unclip door sill molding (5) in marked areas (arrows) from rear toward front with suitable tool | Unclip door sill molding (5) carefully to prevent scratching and breakage. | |
6 | Unhook guide lug on footwell paneling (4) from door sill molding (4) and move door sill molding (5) toward rear. | ||
7 | Remove door sill molding (5). | Handle door sill molding (5) carefully to prevent scratching and breakage. | |
Installation: Ensure that seat belt is routed properly. | |||
8 | Install in the reverse order |