Remove/install underbody trim at left on high-voltage battery carrier

AR61.30-D-1002-02TE

Remove/install underbody trim at left on high-voltage battery carrier

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Model

910 with engine 780.703

1

Remove bolt (3) .

2

Remove expansion rivets (4).

 Installation: Check expansion rivets (4) for damage.

In the case of a corresponding finding,



replace damaged expansion rivets (4).

3

Remove underfloor paneling (1).

 To do so, remove nuts (5).

4

Install in the reverse order.