Modification notes
27.8.04 | Change in the installation position of the front muffler in model 613.358/388 in connection with rear axle 746.217 | Stage 2 |
T13.30-0019-11
1 Remove interior flap above engine and also remove bracket above timing case as necessary.
2 Remove front muffler.
Only required for model 613.358/388 in connection with rear axle 746.217.
3 Unscrew banjo bolt (1) from rear of crankcase.
Installation: Replace sealing rings.
4 Unscrew bolt (3) on coolant line (2) bracket.
Shown on engine 457.944 in model 613.358/388 with rear axle 745.997
T13.30-0020-11
5 Unscrew banjo bolt (4) and remove coolant line (2).
Installation: Replace sealing rings.
6 Detach coolant line (5) form crankcase and from compressor (arrows).
Installation: Replace sealing rings.
7 Install in reverse sequence.
Shown on engine 457.944