AR03.30-P-8002FF | Removing/installing the flywheel | 18.11.03 |
ENGINES 122.9, 134.9, 135.9 in MODEL 454.0
P03.30-2072-01
Shown on engine 135.9
1 Flywheel
2 Bolts
3 Retaining lock
| Removing/installing | ||
1 | Remove clutch | ||
2 | Mark installation position of flywheel (1) | ||
3 | Unscrew bolts (2) at flywheel (1) | Replace bolts (2). | |
| |||
4 | Remove retaining lock (3) | | |
5 | Take off flywheel (1) | Installation: Check flywheel (1) for wear; replace if necessary. | |
6 | Install in reverse order |
Flywheel, driven plate, vibration damper, starter ring gear
Number | Designation | Engine | Engines 134.910/911, 135930/950 | ||
BA03.30-P-1001-01L | Bolt for flywheel on crankshaft | Stage | Nm | 132 | 30 |
Stage 2 | ° | - | 50 | ||
Retaining lock
454 589 00 40 00