Replace air filter element · ap0910d0980a · Mercedes-Benz WIS

AP09.10-D-0980A

Replace air filter element

23.8.11

MODEL 638

MODEL 901, 902, 903, 904, 905

MODEL 690.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

N09.10-2078-01

N09.10-2079-01

N09.10-2097-01

Model 638

N09.10-2092-01

N09.10-2091-01

N09.10-2090-01

Model 690.6, 901, 902, 903, 904, 905

N09.10-2054-01

 	Remove/install
1	Detach intake duct (1) from air filter	Ensure that no dust or dirt particles get into the inlet line (clean air side)!
2	Unplug connector of hot film mass air flow sensor (4)	With code (ZU7) National version for Canada, with code (ZU8) National version for USA, with code (ZU9) National version for Mexico
		 Installation: Ensure that connector is seated properly!
3	Remove top section of air filter housing (2)	 Installation: Insert the lugs (A) into the recesses of the bottom section of the air filter housing (B). Make sure that the locking clips (arrows) are adequately tensioned (arrows)!
4	Take out cartridge (3), insert new cartridge	 Vacuum out lower section of air filter housing where necessary or wipe out with a damp rag.  Installation: Pay attention to faultless seating on the sealing surfaces.
5	Install in the reverse order
6	Reset maintenance indicator	 Only if air filter with service indicator is fitted:
		Model 690.6, 901, 902, 903, 904, 905, model WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5,XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7	AP09.10-D-0951A
		Model 638	AP09.10-D-0951B
7	Confirm renewal of air filter element in service record book