ar9140p061105a

Deployment of emergency tensioning retractor units when no deployment device is present

Loại ar · chủ đề 91.40 · phiên bản 0119 · 2012-05-14

Áp dụng cho: MODEL 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 414, 463.200 /204 /206 /207 /208 /209 /220 /221 /222 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /243 /244 /245 /246 /247 /248 /249 /250 /254 /300 /303 /304 /306 /307 /308 /309 /320 /321 /322 /323 /324 /325 /327 /328 /330 /331 /332 /333 /336 /340 /341, 901, 902, 903, 904, 905 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 463.202 /236 /237 /346 up to Model Year 2013 /MOPF 201

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 3 Body › 91 Seats, bunks, restraint systems › 91.40 Seat belts, emergency tensioning retractors — Dòng 163 · Dòng 168 · Dòng 170 · Dòng 202 · Dòng 203 · Dòng 208 · Dòng 209 · Dòng 210 · Dòng 215 · Dòng 220 · Dòng 230 · Dòng 414 · Dòng 463 (mẫu 200, 202, 204, 206, 207, 208, 209, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 236, 237, 240, 241, 243, 244, 245, 246, 247, 248, 249, 250, 254, 300, 303, 304, 306, 307, 308, 309, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 336, 340, 341, 346) · Dòng 901 · Dòng 902 · Dòng 903 · Dòng 904 · Dòng 905

EinPAS 27 Passive safety/restraint systems › 27.17 Restraint system › 27.17.20 Seat belt/seat belt buckle/seat belt tensioner — Dòng 163 · Dòng 168 · Dòng 170 · Dòng 202 · Dòng 203 · Dòng 208 · Dòng 209 · Dòng 210 · Dòng 215 · Dòng 220 · Dòng 230 · Dòng 414 · Dòng 463 (mẫu 200, 202, 204, 206, 207, 208, 209, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 236, 237, 240, 241, 243, 244, 245, 246, 247, 248, 249, 250, 254, 300, 303, 304, 306, 307, 308, 309, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 336, 340, 341, 346) · Dòng 901 · Dòng 902 · Dòng 903 · Dòng 904 · Dòng 905

AR91.40-P-0611-05A

Deployment of emergency tensioning retractor units when no deployment device is present

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures above 100 °C. Interrupt the current supply when working on these units

AS91.00-Z-0001-01A

Model 163, 168, 170, 202 as of 1.7.93, 203, 208, 209, 210, 215, 220, 230, 414, 463

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures above 100 °C. Interrupt the current supply and disconnect airbag test connector/connector (AB) with emergency tensioning retractor (X11/13) when working on these units

AS91.00-Z-0001-01B

Model 202 up to 30.6.93

Notes on controlled deployment of airbag, sidebag and emergency tensioning retractor units

On model 163, 168, 170, 202, 203, 209, 208, 210, 215, 220, 230, 414, 463, not valid for

AH91.60-P-0611-02P

Ignition cable for firing airbag and seat belt tensioner units

WF58.50-P-9160-02A

Notes on disposing of airbag and emergency tensioning retractor units

All models

OS91.00-P-0001-01A

Use of self-fabricated ignition cable

1 Fabricate ignition cable with a length of 10 m with pressure switch.

2 Plug 2-pin plug coupling into the corresponding emergency tensioning retractor unit.

3 Connect ignition cable to battery.

4 Press both pressure switches at the same time.

Keep a distance of 10 m for safety.

Tài liệu được tham chiếu