Removing and installing fuel strainer in intake connection of fuel metering pump

AR83.70-D-5653B

4.11.96

MODEL 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation D3L-C

Removing and installing fuel strainer in intake connection of fuel metering pump

D83.70-0036-06

1 Fuel line
2 Hose clamp
3 Fuel metering pump
4 Union nut
5 Fuel strainer filter

 	Removal, installation
 Danger!	Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation	Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves.	AS83.70-Z-0002-01A
 Danger!	Fuel vapors present an explosion hazard. Fuel vapors are toxic when inhaled or absorbed. Contact with fuel can cause eye and skin injury.	Fire, open lights and smoking prohibited. Fill and store fuel only in containers intended for this purpose and marked accordingly. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
1	Remove heater	Models 901.36/37/46, 902.36/37/46/47, 903.36/37/46/47, 904.36/46 left-hand steering	AR83.70-D-5302E
		Models 901.36/37/46, 902.36/37/46/47, 903.36/37/46/47, 904.36/46 right-hand steering	AR83.70-D-5302D
2	Loosen hose clamp (2)
3	Pull off fuel line (1)	 Catch fuel running out.
4	Unscrew union nut (4)	 To loosen union nut hold fuel metering pump.
5	Remove fuel strainer filter (5)
6	Install in opposite order

Tài liệu được tham chiếu