Remove/install evaporator unit paneling

Loại ar · chủ đề 83.50 · phiên bản 0105 · 2005-03-16

Áp dụng cho: MODEL 901.67, 902.67, 903.67 with CODE (HH7) Additional air conditioning in rear MODEL WD2, WD3, WD6, WD7 with CODE (HH7) Additional air conditioning in rear MODEL 903.672 with CODE (HK2) Air conditioning in rear with underfloor condenser

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 3 Body › 83 Climate control › 83.50 Rear air-conditioning — Dòng 901 (mẫu 67*) · Dòng 902 (mẫu 67*) · Dòng 903 (mẫu 67*, 672)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Dòng 901 (mẫu 67*) · Dòng 902 (mẫu 67*) · Dòng 903 (mẫu 67*, 672)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Dòng 901 (mẫu 67*) · Dòng 902 (mẫu 67*) · Dòng 903 (mẫu 67*, 672)

AR83.50-D-5010NA

Remove/install evaporator unit paneling

22.2.01

MODEL 901.67, 902.67, 903.67 with CODE (HH7) Additional air conditioning in rear

MODEL WD2, WD3, WD6, WD7 with CODE (HH7) Additional air conditioning in rear

MODEL 903.672 with CODE (HK2) Air conditioning in rear with underfloor condenser

D83.50-1101-11

1 Bolt

2 Dome lamp

3 Roof duct paneling, rear

D83.50-1102-11

4 Evaporator unit paneling

5 Interior motion sensor transmitter and receiver

 	Remove/Install
1	Remove dome lamp (2).
2	Remove plastic expansion rivets and remove rear roof duct paneling (3)
3	Unscrew bolts (1) in the area of the cold air outlet
4.1	Remove interior motion sensor transmitter and receiver (5)	With code FY1, Anti-theft alarm system with interior motion sensor, towing sensor and battery-operated horn
5	Remove plastic expansion rivets, and remove evaporator unit paneling (4)
6	Install in the reverse order