ar8325d1155a

Remove and install pulsed valve

Loại ar · chủ đề 83.25 · phiên bản 0105 · 2003-09-15

Áp dụng cho: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic" MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic" MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 3 Body › 83 Climate control › 83.25 Automatic heater — Dòng 690 (mẫu 6**) · Dòng 901 (mẫu 6**) · Dòng 902 (mẫu 6**) · Dòng 903 (mẫu 6**) · Dòng 904 (mẫu 6**) · Dòng 905 (mẫu 6**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.13 Line/hose/valve — Dòng 690 (mẫu 6**) · Dòng 901 (mẫu 6**) · Dòng 902 (mẫu 6**) · Dòng 903 (mẫu 6**) · Dòng 904 (mẫu 6**) · Dòng 905 (mẫu 6**)

AR83.25-D-1155A

Remove and install pulsed valve

15.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic"

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

Remove and install pulsed valve

D83.25-1105-06

1 Cycle valve

2 Hose clamp

3 Coolant hose

4 Rubber mounts

5 Bolt

6 Bracket

7 Rubber mounts

Remove/install

1

Position suitable receptacle for coolant below vehicle

2

Loosen hose clamps (2) and disconnect hoses (3)

3

Unscrew screws (5) and remove bracket (6) together with pulsed valve (1)

4

Turn bracket (6) slightly to the right and remove from the rubber mounts (4)

5

Pull rubber mounts (4, 7) out

Installation: install new rubber mount.

6

Install in the reverse order