P68.20-2215-06
1 Ashtray housing
2 Shift lever cover
3 Center console
P68.20-2307-09
4 Bolts
5 Cover
6 Screw
10 Bolts
11 Stowage compartment
7 Catch tabs
8 Bolts
9 Electrical connector
| Remove/install | ||
1 | Remove ashtray housing (1) at front on center console (3) | Installation: Check ashtray housing mechanism (1) for proper function, if necessary loosen threaded connection of center console (3) and tighten center console (3) without tension. | |
2 | Remove bolts (4) | Installation: Ensure that center console (3) is installed without tension. | |
3 | Unclip left and right cover (5) at front on center console (3) | ||
4 | Turn bolt (6) approx. 1/2 turn in direction of arrow | ||
5 | Open cover on stowage compartment (11) | ||
6 | Remove cup holder | ||
7 | Remove storage compartment (11) | Lightly press in stowage compartment (11) from outside and pivot out toward side. | |
8 | Unclip catch tabs (7) and push cigar lighter toward rear | ||
9 | Disconnect electrical connector (9) | ||
10 | Remove bolts (8) | Replace self-locking bolts (8). | |
Installation: Ensure that center console (3) is installed without tension. | |||
11 | Unlock center armrest and move to vertical position | ||
12 | Remove carpet insert in stowage compartment. | ||
13 | Remove bolts (10) | Installation: Ensure that center console (3) is installed without tension. | |
14 | Remove center console (3) toward rear | Lift center console (3) at rear. | |
15 | Reinstall in opposite order |