Install and weld in side roof paneling

Loại ar · chủ đề 65.10 · phiên bản 0100 · 2006-07-26

Áp dụng cho: BODY 375.810 in MODEL 375.3 with CODE (DD5) Cab with high roof BODY 375.830 in MODEL 375.1 with CODE (DD5) Cab with high roof BODY 375.840 in MODEL 375.4 with CODE (DD5) Cab with high roof BODY 940.899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (DD5) Cab with high roof BODY 944.899 in MODEL 944.0 /2 with CODE (DD5) Cab with high roof BODY 972.899 in MODEL 970, 972, 974, 975, 976 with CODE (DD5) Cab with high roof

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

AR65.10-W-1020-03B

Commercially available tools

Number	Designation
WH58.30-Z-1003-01A	Electrode miller
WH58.30-Z-1003-02A	Clamping pliers
WH58.30-Z-1031-02A	C-clamp
WH58.30-Z-1001-03A	Round wire brush, braided, dia. 70 mm
WH58.30-Z-1024-04A	Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)
WH58.30-Z-1001-40A	Tarp (fire-resistant)

Workshop equipment

WE58.40-Z-1001-02A	Inert gas welder
WE58.40-Z-1002-02A	Spot welder
WE58.40-Z-1001-03A	Drill (electric/pneumatic)
WE58.40-Z-1003-03A	Angle grinder (electric/pneumatic)
WE58.40-Z-1005-03A	Wet/dry vacuum cleaner

W65.10-1050-01

1 Fit side roof paneling and fasten with clamping pliers.

W65.10-1047-09

2 Side roof paneling  .

3 Drill 4 mm dia. hole in area C and countersink with 8 mm dia. bit on one side.

3 Side roof paneling in areas A to H  .

 Weld area C from countersunk side, weld area F on both sides.

W65.10-1061-01

4 Align roof bow at side roof paneling and tack weld.

5 Side roof paneling in areas J and K  .

6 Grind all plug welds down flat

7 Clean all other welds with wire brush.