Commercially available tools
Number | Designation | |
WH58.30-Z-1002-02A | Hole punching pliers, dia. 7 mm | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
W65.10-1048-09
1 Grind spot welding flanges down to bare metal on both sides in shaded areas and coat insides of spot welding flanges with zinc dust paint.
2 Drill holes in areas F to H and debur.
3 Grind connection surfaces down to bare metal in
areas A to J.
4 Grind spot welding flanges of mount (K) down to bare metal on both sides and coat insides of spot welding flanges with zinc dust paint.
5 Transfer dimension x from undamaged vehicle side to new part.
6 Coat insides of spot welding flange at side roof paneling in area K of mount (K) with zinc dust paint.
7 Fit mount (K) in area A according to determined dimension and fasten with clamping pliers.
8 Mount (K) .