Removing and installing instrument cluster

Loại ar · chủ đề 54.30 · phiên bản 0107 · 2003-09-15

Áp dụng cho: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

AR54.30-D-6015C

30.6.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

Removing and installing instrument cluster

D54.30-1101-06

1 Bolt

2 Cover

3 Bolt

4 Instrument cluster

5 Connector

6 WSP control unit

 	Remove/Install
1	Remove cover at instrument panel		AR68.10-D-1550A
2	Remove cover (2).	 Installation: Hook in cover at front first, then tighten screws at rear.
3	Remove screws (3) and take instrument cluster (4) off instrument panel
4	Remove immobilizer (WSP) control module (6)
5	Unlock connectors (5) and unplug from instrument cluster
6	Install in the reverse order	 Installation: Parameterize instrument cluster if replaced.
7.1	Set time at instrument cluster	Except for code J05/J19/ J28, tachograph.
8	Perform diagnosis quick test routine	 STAR DIAGNOSIS

Tài liệu được tham chiếu

ar6810d1550a