AR46.40-D-9998B | Remove/install bellows | 22.2.01 |
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada
MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA
MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico
D46.40-0002-06
1 Hose clamp
2 Hose clamp
3 Bellows
4 Nut
| Remove | ||
1 | Remove ball socket | ||
2 | Unscrew nut (4) | ||
3 | Remove hose clamps (1, 2) | ||
4 | Detach bellows (3) from steering gear and tie rod | Before installing the bellows, check the tie rod joint and gear rack for signs of corrosion and contamination, if necessary replace steering | |
| Install | ||
5 | Slide on bellows (3) | Rub gear rack grease onto internal bellows to ease assembly | |
6 | Fasten bellows (3) in place using hose clamp (1) | ||
| |||
| |||
7 | Slide hose clamp (2) onto tie rod | Hose clamp (2) not mounted onto bellows until after toe adjustment. | |
8 | Turn-in nut (4) | ||
9 | Install ball head |
Steering linkage
Number | Designation | Model | Model | |||
BA46.40-N-1002-06D | Bellows clamps if clamp pliers | Nm | 7 | 7 | ||
Commercially available tools