ar4330b0018d

Remove/install pressure sensor

Loại ar · chủ đề 43.30 · phiên bản 0201 · 2020-03-31

Áp dụng cho: Model 368.0/1, 382.1, 384.0 Model 384.0

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 2 Chassis › 43 Brakes - pneumatic system and auxiliary brakes › 43.30 Retarder (hydraulic) — Dòng 368 (mẫu 0**, 1**) · Dòng 382 (mẫu 1**) · Dòng 384 (mẫu 0**)

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.21 Retarder › 21.21.12 Sensor/switch/wiring harness — Dòng 368 (mẫu 0**, 1**) · Dòng 382 (mẫu 1**) · Dòng 384 (mẫu 0**)

AR43.30-B-0018D

Remove/install pressure sensor

11.03.2020

Model	368.0/1, 382.1, 384.0
Model	384.0

Remove/install pressure sensor

Represented in model C 384.078

1	Electrical connector
2	Retarder
14B03	Pressure sensor

B43.30-0041-01

 	Remove/install
1	Disconnect the electrical connector (1) from the pressure sensor (14B03)
2	Remove the pressure sensor (14B03) from the retarder housing (2)	 Installation: Apply grease onto the pressure sensor (14B03) sealing ring.
		Olista Longtime lubricating grease, DB supply specification 6804.60, 100 g	*BR00.45-Z-1062-06A
		 .Air pressure sensor	*BA43.30-B-1004-01F
3	Install in reverse order

 Retarder (hydraulic)

Number	Designation			Chassis 368.0/1, 382.1/2, 384.0/2/3, 6852, 693.0/1, 694.0, 695.0/3 - with Voith Retarder R123
BA43.30-B-1004-01F	Air pressure sensor	M16x1,5	Nm	30

Repair materials

Number	Designation	Order number
BR00.45-Z-1062-06A	Olista Longtime lubricating grease, DB supply specification 6804.60, 100 g	A 001 989 36 51 10