ar4210b0800d

Remove/install diaphragm cylinder

Loại ar · chủ đề 42.10 · phiên bản 0102 · 2020-08-14

Áp dụng cho: Model 979 with engine 904.943/970 Model 979 with engine 924.990/991 Model 979 with engine 924.999

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 2 Chassis › 42 Brakes - hydraulic and mechanical systems › 42.10 Service brake — Dòng 904 (mẫu 943, 970) · Dòng 979

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.15 Service brake/vacuum system › 21.15.40 Service brake, front — Dòng 904 (mẫu 943, 970) · Dòng 979

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.15 Service brake/vacuum system › 21.15.42 Service brake, rear — Dòng 904 (mẫu 943, 970) · Dòng 979

Cũng áp dụng cho động cơ/hộp số: 924 990, 924 991, 924 999

AR42.10-B-0800D

Remove/install diaphragm cylinder

04.08.2020

Model	979 with engine 904.943/970
Model	979 with engine 924.990/991
Model	979 with engine 924.999

Remove/install diaphragm cylinder

1	Pads wearing sensor
2	Brake pneumatic piping
3	Nut
4	Membrane cylinder
5	Lever hubcap

B42.10-0412-06

 	Remove/install
1	Remove the brake pads wearing sensor (1).
2	Remove the brake pneumatic piping (2).	 Installation: Connect the brake pneumatic piping (2) and check for leak tightness.
3	Release the self-locking nuts (3).	 Installation: Apply new self-locking nuts (3).
		 .Fastening nut of the diaphragm cylinder to the bracket	*BA42.10-B-1001-08D
4	Remove the membrane cylinder (4).	 Clean the membrane cylinder and the brake caliper surface.
5	Lubricate the lever hubcap (5) and the membrane cylinder axle with grease.	Shell Darina 2 grease	*BR00.45-Z-1031-06A
6	Install in reverse order

 Brake cylinder

Number	Designation		Type 685.203, 979.02/04/07/27
BA42.10-B-1001-08D	Fastening nut of the diaphragm cylinder to the bracket	Nm	180...210

Repair materials

Number	Designation	Order number
BR00.45-Z-1031-06A	Shell Darina 2 grease	Use corresponding commercially available repair materials.