AR35.40-W-0647A | Remove, install differential lock shift cylinder | 10.3.10 |
REAR AXLE 740.892 /894 /896, 748.21 /22 /23 /24 /702 /704 /705
W35.40-0003-05
Shown on rear axle without through-drive
1 Compressed-air line bolt
2 Sealing rings
3 Sealing ring
4 Pressure switch
5 Connector
6 Bolt
7 Shift cylinder (differential lock)
8 Shift piston
9 O-ring
10 Seal
| Remove/install | ||
1 | Detach compressed-air line from shift cylinder (7) | Installation: Install new sealing rings (2). | |
2 | Disconnect connector (5) | Installation: Replace sealing ring (3). | |
3 | Remove shift cylinder (7) | Installation: Replace seal (10). | |
| |||
3 | Remove shift piston (8) from the shift cylinder (7) and remove O-ring (9) | Installation: Install new O-ring (9). Coat sealing surface of the shift piston (8) with synthetic grease. | |
4 | Install in the reverse order |
Differential lock
Number | Designation | Rear axle | Rear axle | Rear axle | |
BA35.40-N-1002-01A | Bolt, differential lock shift cylinder to differential assembly | Nm | 25 | 25 | 25 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1027-06A | Synthetic grease 50 g | A 001 989 32 51 10 |