Remove/install radial shaft sealing ring on drive pinion

Loại ar · chủ đề 35.30 · phiên bản 0402 · 2018-02-22

Áp dụng cho: Rear axle 746.210/213 #M up to 698082 in model 930, 934 Rear axle 746.210/213 #M up to 698082 in model 940, 944 Rear axle 746.210/213 #M up to 698082 in model 950, 954

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Dòng 930 · Dòng 934 · Dòng 940 · Dòng 944 · Dòng 950 · Dòng 954

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Dòng 930 · Dòng 934 · Dòng 940 · Dòng 944 · Dòng 950 · Dòng 954

Cũng áp dụng cho động cơ/hộp số: 746 210, 746 213

AR35.30-W-4672B

Remove/install radial shaft sealing ring on drive pinion

09.02.2018

Rear axle	746.210/213 #M up to 698082 in model 930, 934
Rear axle	746.210/213 #M up to 698082 in model 940, 944
Rear axle	746.210/213 #M up to 698082 in model 950, 954

Remove/install radial shaft sealing ring on drive pinion

1	Nut
2	Propeller shaft
3	Collar nut
4	Drive flange
5	Dust protective ring
6	Radial shaft sealing ring

W35.30-1003-06

Picture no., etc.	Work notes
	Notes on evaluating oil loss at major assemblies		AH00.00-N-0011-02A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
6	Radial shaft sealing ring
		Remove/install drive flange at the rear axle	AR35.30-W-0473C

Remove/install radial shaft sealing ring on drive pinion

Tài liệu được tham chiếu